IKEA Melody
Are you looking for an easy and affordable way to upgrade your lighting fixtures? Look no further! In this article, we’ll be showing you how to fit an IKEA Melody Lampshade to a standard ceiling rose. The best part? You don’t need any electrical experience to complete this project.
Safety
Before we get started, it’s important to take electricity seriously. Turn on the light and confirm it is lit then turn the lighting circuit off at your fusebox. Double-check that the power is off by confirming the light has now gone off. Remember to be extra careful when working with electricity.
To get started, you’ll need a set of wire strippers, a screwdriver, and some cable ties. First, put the connector block through the sealing bowl, and then cut the cable using the wire strippers. Make sure to strip the blue (neutral) and brown (live) wires while keeping the plastic insulation intact.
Cable Ties
Next, loosen the screws holding the ceiling rose and run the cable ties behind the screws. Put the cable ties through the hole in the connector block and tighten them up. Decide how high you want your lamp to be, put a bend in the wire, and stick it through the hole in the connector block.
Connecting Up
Connect the blue wire to the blue and the brown wire to the brown, making sure to squeeze the block to open the clamps and push the wires in until the plastic insulation is in place. Tighten the screws and clip the junction box into place.
Finally, attach the lampshade, put in the bulb, and turn the power back on. Make sure the ceiling cup is securely in place before turning on the power, and remember to turn off the power before removing the lampshade.
That’s it! You now have a beautiful new lampshade to light up your space. We hope this step-by-step guide was helpful. Don’t forget to like and subscribe for more budget-friendly and artful home improvement tips!”