Have you ever experienced an issue with your e-bike kit rear wheel becoming misaligned after just a few minutes of riding? If so, you’re not alone! In this article, I’ll share my experience with this problem and how I was able to solve it.
How I ended up with this problem
A couple of years ago, I converted my bicycle into an e-bike using a kit. Recently, I lent it to a friend, but when it came back, it needed some repairs. Most of the issues were straightforward, but one little problem stumped me: the rear wheel.
The Annoying Rear Wheel Misalignment
Every time I put the wheel into the dropout and tightened it, everything would be fine. However, after just a few minutes of riding, the wheel would become misaligned and start rubbing against the frame. I was at a loss and tried everything from getting advice from forums to installing a second talk arm and locking nuts, but nothing seemed to work.
The Accidental Discovery
Then, by accident, I discovered the solution to this persistent problem. It turned out that there was a washer that was on the wrong side of the frame. This washer is supposed to sit on the outside, then there’s the torque arm and then the nut. At some point, the tire had been changed, and as it was pulled out, the washer was left on the inside. And that was the problem!
The Solution to the Misalignment Problem
So, if you’re experiencing similar issues with your e-bike kit rear wheel, it might be worth checking if the washer is on the right side of the frame. Moving it back to the outside should solve the problem and keep the wheel from becoming misaligned.
In conclusion, I hope this article has been helpful in solving the issue of the misaligned rear wheel on your e-bike kit. If it was, please give it a thumbs up, subscribe to our channel, like the video, and hit the notification bell. I’ll see you in the next one!